MTC Motorsport BMW N55 135i 235i 335i 435i front mount intercooler Gen2
MTC Motorsport BMW N55 Gen 2 135i 235i 335i 435i Front Mount Intercooler, also fits many other models.
This Intercooler is slightly different than the usual N55 one we sell. It’s got a bar and plate core but is 1” thicker at the front where it steps up with a 6” core instead of 5”. Performance-wise we haven’t recorded a massive difference although the Gen 2 intercooler does keep temps slightly cooler after a good amount of pulls on the road and proved to be better on track also. It was 7 degrees C cooler than the normal N55 one we sell which is quite a difference.
The intercooler will fit plug and play with the following vehicles:
• BMW 114i F20 / F21 75KW/102PS (2012+)
• BMW 116i F20 / F21 100KW/136PS (2011+)
• BMW 118i F20 / F21 125KW/170PS (2011+)
• BMW 125i F20 / F21 160KW/218PS (2012+)
• BMW M135i F20 / F21 235KW/320PS (2011+)
• BMW 114d F20 / F21 70KW/95PS (2012+)
• BMW 116d F20 / F21 85KW/116PS (2011+)
• BMW 118d F20 / F21 105KW/143PS (2011+)
• BMW 120d F20 / F21 135KW/184PS (2011+)
• BMW 125d F20 / F21 160KW/218PS (2012+)
• BMW 220i F22 / F23 135KW/184PS (2014+)
• BMW 228i F22 / F23 180KW/245PS (2014+)
• BMW M235i F22/F23 240KW/326PS (2014+)
• BMW 218d F22 / F23 103KW/143PS (2014+)
• BMW 220d F22 / F23 135KW/184PS (2014+)
• BMW 225d F22 / F23 160KW/218PS (2014+)
• BMW 316i F30 / F31 / F34 100KW/136PS (2011+)
• BMW 320i F30 / F31 / F34 135KW/184PS (2011+)
• BMW 328i(x) F30 / F31 / F34 180KW/245PS (2011+)
• BMW 335i(x) F30 / F31 / F34 235KW/320PS (2011+)
• BMW 316d F30 / F31 / F34 85KW/116PS (2012+)
• BMW 318d F30 / F31 / F34 105KW/143PS (2012+)
• BMW 320d F30 / F31 / F34 135KW/184PS (2011+)
• BMW 325d F30 / F31 / F34 160KW/218PS (2013+)
• BMW 330d F30 / F31 / F34 190KW/258PS (2012+)
• BMW 335d F30 / F31 / F34 230KW/313PS (2013+)
• BMW 420i F32 / F33 135KW/184PS (2013+)
• BMW 428i F32 / F33 180KW/245PS (2013+)
• BMW 435i F32 / F33 225KW/306PS (2013+)
• BMW 420d F32 / F33 135KW/184PS (2013+)
• BMW 425d F32 / F33 160KW/218PS (2014+)
• BMW 430d F32 / F33 190KW/258PS (2013+)
• BMW 435d F32 / F33 230KW/313PS (2013+)
We have tested our intercoolers on a few vehicles and found they have absolutely fantastic results. The IAT compared to the standard intercooler are reduced massively which means you get consistent increased performance.
The standard intercooler and the MTC intercooler both had intercooler intake temperatures of between 135-140 degrees through 10 runs on the road.
At the other side of the intercooler into the engine the standard intercooler temperatures were between 75-80 degrees whereas the MTC intercooler temperatures were around 25 degrees over all 10 runs and was proven to be fantastic on track.
The MTC intercooler features a massive 6" bar and plate core intercooler with flowed cast end tanks and 4 extra rows at the front to increase the surface area providing the best cooling properties.
We have added a fin to the inside of the casting on the intake side to direct some of the airflow up through the top 4 extra cores.
This intercooler weighs around 12kg and provides over 100% more volume and near 100% more surface area than the standard intercooler.It is proven to handle 600bhp as I have a car running this power with the Gen 2 intercooler.
Dimensions are 520mm X 215mm X 180mm which is a massive increase on the standard intercooler and the exact same dimensions as the Wagner Evo 2 intercooler.
Intercooler is powder coated in grey with machined alloy ends left bare.
The intercooler is a direct fit and there are some great videos on YouTube to follow. However, professional installation is recommended and should take approximately 1-2 hours.
As good as if not the best intercooler on the market for the BMW's at the moment.
Product Code: MTCCZB7932
