Boost Cooler Waterinjection Stage 1 - SP10102

Complete Starter-Kit with adjustable pressure-switch

The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger.

Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern leanburn engines.

Used for years on turboprop aircraft, European rally cars, and even F1 until it was banned because it provided too much horsepower to the turbo motors.

Compressed air is heated air which causes power robbing and engine destroying detonation.

Cool the air with the Boost Cooler WaterInjection-System!

Atomization
The Boost Cooler is unsurpassed in it's atomization due to superior nozzle design - The nozzle first spins the fluid supersonically before forcing it through a venturi shaped orfice - no one else comes close!
The key to water/methanol injection is how fine the fluid droplets are upon injection.
 

The smaller the droplets, the more total surface area per volume injected which = more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water.

Allows you to run safely more boost and/or more timing

• 
  Reduce the intake charge temperature up to 55°C, results in a denser more powerful air/fuel charge
• 
  Perfect for cars with thermical problems and prior tuned cars
  
• No loss of boost as with a intercooler
  

  Pumpsystem
  
  

  • ISO9001, EMC und UL certified
  • Long lifetime, 10+ Millions cycles
  • no lost in pressure even with high volumes
  • Dry run up to 1 hour!
  • Methanol-resistant

   

• No wear issues only clean combustion chambers
  
• Reduce the specific fuel consumption

• Viton Diaphragm High Volume pump
• 150-220PSI/15Bar Pressure (we will select the right pump for you)
• 2 nozzles, different sizes according to your car
• Integrated Particlefilter
• Bosch Relais
• Adjustable boost Pressure Swich
• 1/4" O.D. Tubing
• All fittings and eletrical parts
• Fluid Reservoir (1,9litre)
• Power-LED for your interieur
• Detailed installation instructions (English / German)
• Different Tests of Tuningmagazines
• 25 years full warranty for buyer

Product Code: SP10102